Bodypoint Shoulder Harness Strap Guide
Simple and easy-to-install, the Harness strap guides provide maximum adjustability and allows harnesses on chairs to be used where they couldn’t before –chairs with low, curved or contoured backs.
This product is not available in your selected combination
Product Code: {{stockCode}}
Please note the selected product option is not available for trial.
{{variationPriceLabel?'Price From':'Price'}}
{{price | currency:undefined:2}}
Incl GST
Regular Price
{{regularPrice | currency:undefined:2}}
Incl GST
{{variationPriceLabel?'Sale Price From':'Sale Price'}}
{{salePrice | currency:undefined:2}}
Incl GST
Product is in stock
Orders placed by 2pm on weekdays will leave our warehouse the same day.Product has low stock availability
If you would like to place a bulk order for this item there is a chancesome units may need to go on back order. We will contact you with
an approximate delivery date once order is placed.
Please call 0800 31 61 81 for more information.
Product is currently out of stock
Due to high levels of demand, this product is currentlynot in stock but is available to pre-order. Once ordered
we will contact you with an approximate delivery date.
Please call 0800 31 61 81 for more information.
This item has been added successfully. View cart.
With Bodypoint Strap Guides, you can fine-tune the height, horizontal position, and angle of strap attachment to even out pressure distribution over the shoulder, improving support and comfort for the user. Each side can be adjusted independently for a custom fit.
Available in two lengths to accommodate different backrest sizes and shapes. (Short - 150mm and Long - 200mm)
Compatible with front- and rear-pull strap styles and all Bodypoint end fittings.
Attach directly to backrests with included M6 fastener kit and spacers or use optional Strap Guide Mounting Adapters (sold separately) to increase mounting and adjustment options. Strap Guides sold in pairs.
Includes Fasteners.
- Simple, easy-to-install design
- Compatible with a variety of backrests, harnesses, and end fittings
- Long mounting slots increase adjustability
- Thin design fits into tight spaces
- Integrated holes allow easy harness attachment without extra drilling
- Super strong spring steel absorbs shock, giving users greater comfort and preventing backrest damage
| Size | Length |
| Short | 150mm Long |
| Long | 200mm Long |
Which hip belt size/type should I order?
Bodypoint padded hip belt part numbers put you in control for a more reliable belt fit.
Sizing is shown in the charts below. You can easily tell the webbing width and padded length from looking at the size code (e.g., M46).
Webbing width for all padded hip belts:
- Small = 2.5cm (1") wide webbing
- Medium = 4cm (1-1/2") wide
- Large = 5cm (2") wide
The padded length (the part of the belt that is up against the body in front of the chair) is indicated by the numeral after the webbing size. For example, an HB205-M46 has 1-1/2” wide webbing and a total padded length of 46cm.
Padded hip belt sizing
How to measure for a Padded Hip Belt
To ensure proper fit and best performance, always select the padded belt size that best fits the user. When working with the Evoflex, consider adding Belt Extenders if longer straps are needed to reach the desired mounting point (see below).
Determine the correct belt size for the user:
Additional instructions for the Evoflex®
Determine total length needed for mounting:
Two-Point and Four Point Padded Hip Belts
Evoflex® Hip Belts
Evoflex® + NEW Belt Extender
Click to see how to determine the mounting point and angle
Click to see how to determine the total padded length you need
Now you can select the belt size that most closely matches what the user needs.
End Fittings
Choose desired end-fitting, then add suffix -B1 or -B2 to the end of the part numbers.
Cinch-Mount™ (-B2)
Allows quick, easy and precise adjustments to strap length for changes in weight and clothing
Flat-Mount™ (-B1)
Versatile, lowest profile
As before, A1 is a Flat-Mount™ + FrameSaver™ clamp, A2 is a Cinch Mount™ + FrameSaver™, B1 is the Flat-Mount™ only, and B2 is the Cinch-Mount™.
What is the difference between front-pull and rear-pull?
These terms relate to tightening the top straps on our shoulder harness and Stayflex products. Front-pull (pulling the adjustment straps forward) would be useful if the user can adjust the top straps herself, or if a caregiver wanted to maintain eye contact with the user while the adjustment was being made. Rear-pull (pulling the adjustment straps backward) separates the attachment point from the user and is ideal for thicker backrests and some children.
What is a Flat-Mount™/Cinch-Mount™?
Flat-Mount™ and Cinch-Mount™ are types of end-fitting hardware that attach products to wheelchairs. Flat-Mount™ end fittings are triangular pieces of heat-treated nickel-plated steel that have a slot through which to weave the webbing and then you use the provided steel slide to adjust the webbing tension. Cinch-Mount™ end fittings function like cam buckles, in which you open the cover then feed the webbing through and then close the cover to lock the webbing in place, a more secure means of grasping the webbing.
What is a FrameSaver™ Clamp?
A FrameSaver™ clamp is a nylon clamp that fits around the tubing on a seat rail and creates a mounting point without having to drill into the seat rail.
Can I use a Bodypoint shoulder harness on a sling back chair?
No, Bodypoint shoulder harnesses with top straps need a rigid or hard backrest for attachment since they have to be screwed into the backrest. However, our upper body support options for sling back chairs include our Monoflex, Chest Belt and Universal Elastic Strap.
How do I choose the correct size?
Sizing details, including measuring instructions for postural supports, are included in our Bodypoint Product Guide.
